LSI 700 Polysculptor

Specifications:

• 6 inch square tubing, 3/16 inch wall for primary beam
• 3/8 inch 6061T6 machined aluminum surface on beam
• 2 inch by 4 inch tubular steel custom adjustable leveling feet welded on 4 foot increments along bottom of beams
• ½ inch steel base levelers to install into clients floor
• Linear Rail Motion on x-axis:
• Angular Steel with 4" Diameter VGroove High Precision Rollers
• 6 inch by 6 inch double stacked steel gantry, stitch welded
• ½" inch gusseted 6061T6 aluminum gantry end plates
• Linear rail motion on Y and Z axis Nook steel linear rail with Steel ball bearing carriages
• Rack and pinion drive system on X and Y axis
• Goodyear Kevlar belt drive on z axis
• High speed high torque 29 inch pound close loop servo motor on X axis, DC brushed motor
• High speed high torque 29 inch pound close loop servo motor on Y axis, DC brushed motor
• High speed high torque 29 inch pound close loop servo motor on Z axis, DC brushed motor, 2 inch cylinder air assist
• Fiber-optic communication used to communicate between PLC, PC, and Servo Drive, this reduces the chance of RF noise interfering with the operation of the table
• Automatic spindle control, auto feed and spindle speed, and on the fly speed control
• Machine side graphing capability
• Operator work station/computer stand and machine-side operator control pendant
• 48" under gantry clearance and 16" to 36" of Z-axis travel
• Maximum simultaneous X/Y traverse speed of 1200ipm. Actual cutting speeds are dependent on 2 layers of ½" OSB with a ½" cutter at 420ipm
• Non-accumulating repeatability 0.001", machine tolerance X and Y axis tolerance of 0.0625
• Simultaneous 3 axis movement
• X,Y,Z machine-home limit switches (total of 5 switches for high and low machine limits).
• Machine can be wired for 208, 220, 230, 380, 400, 415, and 440 VAC 3-phase or 110 volt single phase
• Machine foot print is 12 foot by 27 foot, plus an additional 3 foot by 3 foot of space for the control center
• 4th Axis available
• Indexing Head available